  |
|
|
Stormwater management | UIC at cleanup sites | UIC Registration | UIC Database Search Tool
The Underground Injection Control Program (UIC) protects groundwater quality by regulating discharges to UIC wells.
UIC wells are manmade structures used to discharge fluids into the subsurface. Examples are drywells, infiltration trenches with perforated pipe, and any structure deeper than the widest surface dimension. The majority of UIC wells in Washington are used to manage storm water (i.e., drywells) and sanitary waste (large on-site systems), return water to the ground, and help clean up contaminated sites. The potential for groundwater contamination from injection wells depends upon well construction and location; quality of the fluids injected; and the geographic and hydrologic settings in which the injection occurs.
Guidance for UIC Wells that Manage Stormwater
This document provides the design and best management practices (BMPs) to reduce solids, metals and oil from UIC wells used along roads, parking areas or used to collect roof runoff (if using the presumptive approach). This Guidance is not to be used for the design of infiltration trenches with perforated pipe (see following section).
Note: this memo is available in Adobe Acrobat (.PDF file) format. To view and/or print PDF files, you first will need to download and install Adobe Acrobat Reader.
Infiltration Trenches with Perforated Pipe
Infiltration trenches with perforated pipe must be registered. They are designed, constructed, operated, and maintained according to either the current Stormwater Management Manual for Western (2005) or Eastern (2004) Washington, or an equivalent approved manual. Note: Section 5.6, Subsurface Infiltration of the Stormwater Management Manual for Eastern Washington Manual (which was replaced by the Guidance for UIC Wells that Manage Stormwater) does not apply to infiltration trenches. Click here to view a summary of the infiltration trench design requirements for Eastern and Western WA.
Infiltration trenches used at a single family home and receiving only residential roof runoff are exempt from registering.
Approved treatment Best Management Practices (BMPs) for UIC wells
If a UIC well requires a treatment BMP for rule authorization, the BMP must be an Ecology-approved BMP. See treatment options for E and W WA. The Treatment technology use designation GULD (general use level designation) versus CULD and PULD is important, so visit the Emerging Treatment Technology page for more information (www.ecy.wa.gov/programs/wq/stormwater/newtech/index.html).
Groundwater remediation projects where Ecology regulatory resolution is required should be conducted through the Toxics Cleanup Program. UIC registration would be part of a voluntary cleanup process (www.ecy.wa.gov/programs/tcp/vcp/Vcpmain.htm) or formal MTCA order.
Registration forms have been updated; infiltration questions were added.
UIC Class 5 Well Fact Sheet (EPA)
A search-able, read-only version search tool for the UIC database is available. It can be queried several ways. A UIC number is assigned to each site and entered into the database. Assignment of a UIC number does not mean the site qualifies as Rule Authorized or is in compliance. The UIC well system has to meet the ground water protection requirements of the program to be rule authorized.
For more information on the UIC program please contact:
Mary Shaleen Hansen
Water Quality Program
WA Department of Ecology
P. O. Box 47600
Olympia, WA 98504-7600
Phone: 360.407.6143
Email: maha461@ecy.wa.gov
Copyright © Washington State Department of Ecology. See http://www.ecy.wa.gov/copyright.html.
